
Značajno unapređenje kapaciteta platforme za rešavanje većih izazova
iData K3 Pro je novoizdati profesionalni Android terminal sa tastaturom. Zadržava isti dizajn kao prethodna verzija, dostupan u opcijama sa pravim i nagnutim uglom. Donosi značajna unapređenja u kapacitetu platforme, performansama skeniranja i drugim aspektima. Uz to, unapređen je na najnoviju verziju operativnog sistema, omogućavajući radnicima da uživaju u poboljšanim performansama bez promene trenutnih operativnih navika, dok produžava vek trajanja proizvoda, smanjuje troškove preduzeća i povećava operativnu efikasnost.
Novo unapređeni procesor sa AnTuTu rezultatom većim od 200.000*, u kombinaciji sa najnovijim Android 14.0, pruža korisnicima iskustvo rada uporedivo sa vodećim pametnim telefonima. Osim toga, značajno produžava vek trajanja proizvoda, omogućavajući radnicima da se lako nose sa trenutnim i budućim izazovima.
Sa najnovijim iData skenerom, uređaj može brzo očitati gotovo svaki 1D/2D barkod, čime se značajno povećava operativna efikasnost. Opcije skeniranja pod pravim i nagnutim uglom, zajedno sa optimalnim uglom skeniranja od 27°, omogućavaju lako skeniranje i potvrdu informacija bez potrebe za podizanjem uređaja.
Novo unapređeni dizajn odvojive baterije od 5000mAh sa podrškom za rezervno napajanje značajno povećava trajanje baterije uređaja. Kada je baterija pri kraju, uređaj ne mora da se isključuje – dovoljno je zameniti bateriju i uređaj je odmah spreman za upotrebu. Zahvaljujući zaštitnom dizajnu, uređaj može raditi stabilno u teškim uslovima i izdržati slučajne padove.
System Configuration | |
Processor | Octa-core 2.0GHz high-performance processor |
Operating System | Android 14.0 |
Memory (ROM + RAM) | 64GB+4GB (standard) |
SIM | Single SIM card |
Expansion Slot | Micro SD card (up to 512 GB) |
Display Screen | 4-inch, resolution: 800*480 pixels |
Touch Screen | Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation |
Camera | 8MP rear camera, support auto-focus |
Flashlight | 800mA flashlight |
Keypad | 28 keypads: front key*24, side scan key *2, sidepower key*1,sidecustomkey*1 |
Battery | 3.85V lithium battery, with 5000mAh, detachable, backup battery support |
Audio | Built-in microphone |
Charging Method | Type-C charging and pin port charging, support 18W fast charging |
Reminder | High power speaker/Vibration reminder/LED reminder |
Vibrating Motor | Built-in vibrating motor |
Sensors | G-sensor/Proximity sensor/Light sensor/Gyroscope/Geomagnetic sensor(optional) |
Intercom Function (Optional) | Support one-button PTT calls |
Structure Parameter | |
Dimension (L*W*D) | 162mm*68mm*19mm (the thickest part of tilt-angle version is 29.4mm) |
Weight | 278g (Battery included) |
Communication Transmission | |
WWAN (Network frequency) | China & Eurasian version: 2G:B2/B3/B5/B8 3G:WCDMA:B1/B5/B8 4G:FDD-LTE:B1/B3/B5/B7/B8/B20 TDD-LTE:B34/B38/B39/B40/B41 American version: 2G:B2/B3/B5 3G:B1/B2/B4/B5 4G:B1/B2/B3/B4/B5/B7/B12/B17/B28A/B28B/B41/B66/ B71 |
WWAN (Data service) | GSM/GPRS/EDGE/UMTS/HSPA/HSPA+/WCDMA/TDD-LTE/FDD-LTE |
WLAN Function | Wi-Fi 802.11 a/b/g/n/r/ac (2.4G+5G dual-band Wi-Fi), support fast roaming |
Bluetooth | Bluetooth 5.0, support BLE |
GPS | GPS/AGPS/BDS/Galileo/GLONASS/QZSS |
Environmental Parameter | |
Working Temperature | -20°C - 60°C *Do not charge under low temperature conditions for the safety concerns |
Storage Temperature | -40°C - 70°C (without the battery) |
Humidity | 0 - 95% (no moisture condensation) |
Drop Specification | Multiple drops to concrete floor from the height of 1.5m |
Roller Drop Specification | 1000 times of roller drops from a height of 0.5 meter |
Ingress Protection | IP65 |
ESD Protection | ±15KV (air discharge), ±8KV (contact discharge) |
Scanning Engine | |
Barcode Type | It can scan one-dimensional / two-dimensional barcodes |
Scanning Accuracy | ≧3.33mil |
Scanning Angle | Pitch: ±60°; Skew:±45°; Tilt:360° |
View Angle | Horizontal:44.3°,Vertical:28.4°,Diagonal:51° |
Motion Error Tolerance | 8m/s |
NFC (Optional) | |
Working Frequency | 13.56 MHz |
Reading Distance | Within 20 mm |
Communication Protocol | ISO14443A/14443B/15693 |
Communication Interface | |
USB Interface | Type-C (with headset function) *1 |
OTG Interface | Support |
Development Support | |
Programming Language | Java |
Development API | iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface |
Development Tool | Eclipse/Android Studio |
Accessories (More details in accessories guide) | |
Standard Accessories | USB cable*1, power adapter*1, device-back strap*1, battery*1 |
Optional Accessories | Single charging cradle, bottom charger, 4-slot charging cradle, 4-slot battery charging cradle, fanny pack, hand strap, protective film,protective case |
Note | |
****** | Due to irregular updates of the product line, the content is subject to change without notice. |